Changes

0.9.8 (2009-03-03)

• Fix LEON2 support in the Grlib view
• Grlib view is now refreshed when target is halted
• Update to GRMON 1.1.34

0.9.7 (2008-10-17)

• Some items on the "Actions" menu did not work
• Using the toolbar for single-step did not work
• Fixed loading of User Commands modules. Now supports paths with spaces and non-ascii characters
• Update to GRMON 1.1.32

0.9.6 (2008-09-29)

• Prompt for file when running "dump" without a file
• Fix swapped id in Grlib view
• Improve Automatic Updates

0.9.5 (2008-09-22)

• Redesigned target parameter interface
• Uses GRMON 1.1.31a

0.9.4 (2008-05-21)

• Some required Windows dll files was missing
• When libusb was not installed it was impossible to connect to any target
• Connection to JTAG Parallel cable would fail because of a permission issue
• Added the detach command to the Action menu
• Uses GRMON 1.1.29

0.9.3 (2008-04-02)

• Uses GRMON 1.1.28
• Cache View did not remove old tabs when switching target

0.9.2 (2008-01-24)

• Uses GRMON 1.1.27
• Support MMU in Memory view and Disassembly view
• "go" command was not working
• Could crash on very long backtraces

0.9.1 (2007-11-28)

• New connection dialog with new interfaces
• Fix Software Update for pro version
• Improve Connection progress dialog

0.9.0 (2007-10-05)

• GrmonRCP is now based on Eclipse 3.3
• Uses Bitstream Vera Sans Mono as monospaced font http://ftp.gnome.org/pub/GNOME/sources/ttf-bitstream-vera/1.10/

0.8.0 (2007-04-13)

• Enhancements to the configuration dialog
• Documentation updated
• Load in console will update recent files under the load button. Also load without filename will show a filedialog.
• GrlibView need not update on every change.
• CacheView will show when a refresh is needed by showing a red exclamation mark on the refresh button.
• CacheView did not work because of an exception in a constructor.
• TraceView wasn't working when AHB trace was just 1 line
• Added view to enable/disable and select active CPU
• Support for batch-files
• The result of commands are now printed as in grmon.
• Fixed crash when connecting to a LEON-FT with the eval-version (caused by exit).

0.7.1 (2007-02-15)

• Fixed bug: In DisassemblyView the address for PC-relative call and branch instructions would be displayed wrong if it's not the current instruction.
• Fixed bug: Run to here in DisassemblyView didn't work.
• Console commands: Run, continue and load will update the GUI correctly

0.7.0

• USB permissions documented.
• Fixed bug: Could crash on next attempt to connect after trying to connect to USB without the cable connected
• Breakpoints can be added from the console
• Init can be canceled (uart, eth)
• Download can be canceled
• Added /dev/ttyUSBx to devices

0.6.4

• Reset some statevariables before connecting.
• Fixed bugs:
  • Connect with Serial using some device other than default. Then connect with JTAG
  • it will try to use the device selected earlier. Can be different configurations.
  • If attempt to connect with Altera JTAG fails with missing library (.so/.dll) then GrmonRCP will crash if attempt to connect with other interface.
  • Step restarts the application the first time

0.6.3

• BacktraceView
• Updates to libGRMON:
  • backtrace (bt)
  • local scratchpad RAM

0.6.2

• Added Altera JTAG interface
• Changed default interface from GRMON to GRMON-eval

0.6.1

• added libusb0.dll
• compiled for Java 1.4

0.6.0

• First public release